|
Features Include: - Spans a range of CPU types from small/medium systems, to complex networked systems handling tens of thousands of I/O, addressing the needs of all applications.
- Embraces contemporary technologies such as high speed Ethernet, open systems and Internet capabilities, to reduce lifecycle costs via remote system management & maintenance.
Features Include: - Spans a range of CPU types from small/medium systems, to complex networked systems handling tens of thousands of I/O, addressing the needs of all applications.
- Embraces contemporary technologies such as high speed Ethernet, open systems and Internet capabilities, to reduce lifecycle costs via remote system management & maintenance.
- Increases productivity throughout a system life cycle of design, implementation and maintenance by offering a range of capabilities that allow more to be achieved in less time.
- Multiple CPU capability adds open ended system performance and flexibility.
- Multiple program capability allows concurrent development, code reuse, better program organization and faster troubleshooting for less downtime.
- Multiple access to the system allows many technicians to work simultaneously for faster system debugging and maintenance.
- High productivity GX Developer programming tools permit designers to concentrate on the automation of their system, not the configuration of the controller.
- Networking & communication options distribute Q Series systems over wide areas while reducing wiring costs.
- Sequence CPUs can also address process applications by means of built-in PID capabilities.
- Extremely compact package saves panel costs.
- Certified bu UL, cUL, CE as indicated and DNV, ABS, RINA, LR & NK shipping approvals for all Q Series.
Q Mode Model List| Product | Type | Outline | | Basic model | Q00JCPU | Program step: 8k steps CPU intrgrated with power supply and base | | | Q00CPU | Program step: 8k steps | | | Q01CPU | Program step: 14k steps | | High Performance model | Q02CPU | Program step: 28k steps | | | Q02HCPU | Program step: 28k steps | | | Q06HCPU | Program step: 60k steps | | | Q12HCPU | Program step: 124k steps | | | Q25HCPU | Program step: 252k steps | | Motion CPU module | Q172CPU | For 8-axis control | | | Q173CPU | For 32-axis control | | Battery | Q6BAT | Replacement baterry for Q02/Q02H/06H/Q12H/Q25HCPU | | IC memory card | Q2MEM-1MBS | SRAM card : 1 M bytes | | | Q2MEM-2MBF | Flash card : 2M bytes (Flash ROM) | | | Q2MEM-4MBF | Flash card : 2M bytes (Flash ROM) | | | Q2MEM-8MBA | ATA card : 8M bytes (ATA flash ROM) | | | Q2MEM-16MBA | ATA card : 16M bytes (ATA flash ROM) | | | Q2MEM-32MBA | ATA card : 32M bytes (ATA flash ROM) | | SRAM card battery | Q2MEM-BAT | Replacement battery for Q2MEM-1MBS | | Main base unit | Q33B | Power supply + CPU + 3 I/O slots for Q series modules | | | Q35B | Power supply + CPU + 5 I/O slots for Q series modules | | | Q38B | Power supply + CPU + 8 slots for Q serie modules | | | Q312B | Power supply + CPU + 12 slots for Q serie modules | | Extension base unit | Q63B | Power supply + 3 I/O slots for Q series modules | | | Q65B | Power supply + 5 I/O slots for Q series modules | | | Q68B | Power supply + 8 I/O slots for Q series modules | | | Q612B | Power supply + 12 I/O slots for Q series modules | | | Q52B | 2 I/O slots for Q series modules (power supply module unnecessary) | | | Q55B | 5 I/O slots for Q series modules (power supply module unnecessary) | | Adaptor base unit | Q6DIN1 | DIN rail mouting adaptor for Q38B/Q312B/Q68B/Q612B | | | Q6DIN2 | DIN rail mouting adaptor for Q35B/Q65B | | | Q6DIN3 | DIN rail mouting adaptor for Q33B/Q63B | | Extension cable | QC05B | 0.45m (1.48feet) | | | QC06B | 0.6m (1.96feet) | | | QC12B | 1.2m(3.93feet) | | | QC30B | 3m (9.84feet) | | | QC50B | 5m (16.4feet) | | | QC100B | 10m (32.8feet) | | Power supply module | Q61P-A1 | 100-120VAC input/5VDC 6A output | | | Q61P-A2 | 200-240VAC input/5VDC 6A output | | | Q62P | 100-240VAC input/5VCD 3A, 24VDC/0.6A output | | | Q63P | 24VDC input/5VDC 64 output | | | Q64P | 100-120/200-240VAC input/5VDC 8.5A output | | INPUT MODULE | | | | AC | QX10 | 100-120VAC/7 to 8mA, 16 points; response time: 20ms, terminal block | | | QX28 | 240VAC, 8 points, terminal block | | DC | QX40-S1 | 24VDC/4mA, positive common, 16 points, response time: 1/5/10/20/70ms.terminal block | | | QX40-S1 | 24VDC positive common input 16 points, terminal block for high-speed input(response time of 0.1ms can be specified) | | | QX41 | 24VDC/4mA,positive common, 32 points response time: 1/5/10/70ms, connector (Note 2) | | DC sensor | QX42 | 24VDC/4mA, positive common, 64 points, response time: 1/5/10/20/70ms, connector (Note 2) | | | QX70 | 5-12VDC input shared between positive common and negative common, 16 point terminal block | | | QX71 | 5-12VDC input shared between positive common and negative common, 32-point connector (Note 2) | | | QX72 | 5-12VDC input shared between positive common and negative common, 64-point connector (Note 2) | | | QX80 | 24VDC/4mA, negative common, 16 points, response time: 1/5/10/20/70ms, terminal block | | | QX81 | 24VDC/4mA, negative common, 16 points, response time: 1/5/10/20/70ms, connector(Note 3) | | OUTPUT MODULE | | | | Contact | QY10 | 100-120VAC/7 to 8mA, 16 points, response time : 20ms, terminal block | | | QY18A | 240VAC, 8 points, response time : 20ms, terminal block | | AC triac | QY22 | 24VDC/0.6mA, 16 points, terminal block, without fuse | | Transistor (Sink) | QY40P | 12/24VDC 0.1A/point, 1.6A/common, 16 points (16 points/common)0, output delay: 1ms, terminal block, with short-circuit protection function | | | QY41P | 12/24VDC 0.1A/point, 2A/common, 64 points (16 points/common), output delay: 1ms, terminal block, with short-circuit protection function(Note 2) | | | QY42P | 12/24VDC 0.1/point, 2A/common, 64 points(32 points/common), output delay: 1ms connector, with short-circuit protection function(Note 2) | | | QY50 | 12/24VDC 0.5A/point, 4A/common, 16 points (16 point/common), output delay: 1ms, with fuse, terminal block | | Transistor | QY68A | 5-24VDC,2A/point, 8A/module, 8 points, all points independent,sink/source,terminal block,withoutfuse | | TTL-CMOS (Sink) | QY70 | 5/12VDC, 16mA/point, 16 points (16 point/common), output,delay: 0.3ms,with fuse, terminal block | | | QY71 | 5/12VDC, 16mA/point, 32points (32 point/common), output,delay: 0.3ms,with fuse, connector (Note 2) | | Transistor (Source) | QY80 | 12/24VDC 0.5A/point, 4A/common, 16 points (16 point/common), output delay: 1ms, with fuse, terminal block | | | QY81P | 12/24VDC 0.1A/point, 2A/common, 32 points (32 points/common), output delay: 1ms, terminal block, with short-circuit protection function(Note 3) | | I/O composite module | | | | DC Input/transistor output | QH42P | 24VDC positive common Input: 32 points (response time:1/5/10/20/70ms) | | | QX48Y57 | 24VDC/0.5A sink output: 7 points, with fuse, terminal block | | I/O module connector | A6CON1 | Soldering 32- points connector(for QX41/42, QY41P/42P) | | | A6CON2 | Solderless terminal connection 32-point connector (for QX41/42, QY41P/42P) | | | A6CON3 | Flat cable pressure-displacement 32-points connector (for QX41/42, QY41P/42P) | | | A6CON1E | Soldering 32- points connector(for QX81, QY81P) | | | A6CON2E | Crimp-contact connection 32 point connector(for QX81, QY81P) | | | A6CON3E | Flat cable pressure-displacement 32-points connector (for QX81, QY81P) | | Interrupt module (Note 6) | Q160 | 16 points, response time: OFF→ON 0.2 ms or less, ON→OFF 0.3ms or less | | Blank cover | QG60 | Blank cover for I/O slot | | Analog module (Note 5) | Q64AD | 4 chanels, analog-to-digital conversion: voltage/current input | | | Q68ADV | 8 chanels, analog-to-digital conversion: voltage input | | | Q68ADI | 8 chanels, analog-to-digital conversion: voltage input | | | Q62DA | 2 chanels, digital-to-analog conversion: voltage/current input | | | Q64DA | 4 chanels, digital-to-analog conversion: voltage input | | | Q68DAV | 8 chanels, digital-to-analog conversion: voltage input | | | Q68DAI | 8 chanels, digital-to-analog conversion: voltage input | | Temperature input module | Q64TD | 4 channels, thermocouple input | | | Q64RD | 4 channels, platinum temperature mesuring resistor input (3/4-wire type) | | High -speed counter | QD62 | 2 channels, 200kpps, 5/12/24VDC input, sink transistor output | | | QD62D | 2 channels, 500kpps, differential input, sink transistor output | | | QD62E | 2 channels, 200kpps, 5/12/24VDC input, source transistor output | | Positioning module(Note 5) | QD75P1 | 1-axis, open collector output | | | QD75P2 | 2-axis, open collector output | | | QD75P4 | 4-axis, open collector output | | | QD75D1 | 1-axis, differential output | | | QD75D2 | 2-axis, differential output | | | QD75D4 | 4-axis, differential output | | | QD75M1 | 1-axis, SSCNET compatible | | | QD75M2 | 2-axiss, SSCNET compatible | | | QD75M4 | 4-axis, SSCNET compatible | | | QD70P4 | 4-axis, pulse output(servo motor, stepping motor compatible) | | | QD70P8 | 8-axis, pulse output(servo motor, stepping motor compatible) | | Ethernet module | QJ71E71 | For 10BASE-5/10BASE-T | | | QJ71E71-B2 | For 10BASE-2 | | | QJ71E71-100 | For 10BASE-T/100BASE-TX | | MELSECNET/H module | QJ71LP21-25 | SI/QSI optical cable, duplex loop, for control, ordinary or master station | | | QJ71LP21G | GI optical cable, duplex loop, for control, ordinary or master station | | | QJ72LP25-25 | SI/QSI optical cable, duplex loop, for remote I/O station | | | QJ72LP25G | GI optical cable, duplex loop, for remote I/O station | | | QJ71BR11 | Coaxial 75Ω cable, simplex bus | | | QJ72BR15 | oaxial 75Ω cable, simplex bus for remote I/O station | | | Q80BD-J71LP21-25 | MELSECNET/H board for personal computer, optical cable specifications, for control or ordinary station | | | Q80BD-J71LP21G | MELSEC/H board for personal computer, SI/QSI/H-PC cable specifications, for control or ordinary station | | | Q80BD-J71BR11 | MELSECNET/H board for personal computer, coaxial cable specifications, for control or ordinary station | | CC-Link module (Note 5) | QJ61BT11 | For master/local | | Serial communication module (Note 5) | QJ71C24 | RS-232 1 channel RS-422/485 1 channel | | | QJ71C24-R2 | RS-232 2 channel | | Intelligent communication module | QJ51 | RS232 2 channels | | | QD51-R24 | RS232 1 channels,RS422/485 1 channel | | | SW1IDV-AD51HP(Note 4) | QD51 software package (share between DOS/V personal computer and AD51H-S3/A1SD51S) | | | SW1NX-AD51HP(Note 4) | QD51 software package (share between DOS/V personal computer and AD51H-S3/A1SD51S) | | Modem interface module | QJ71CMO | Built-in modem 1 channel/RS-232 1 channel | | FL-net module (Note 5) | QJ71FL71 | For 10BASE-5/10BASE-T | | | QJ71FL71-82 | For 10BASE-2 | | Extension base unit | QA1S65B | Power supply + 5 I/O slots for AnS series modules | | | QA1S68B | Power supply + 8 I/O slots for AnS series modules | | | QA65B | Power supply + 5 I/O slots for large A series modules(high-performance model only) | | CPU module | Q02CPU-A | Program : 28k steps | | | Q02HCPU-A | Program : 28k steps | | | Q06HCPU-A | Program : 60k steps | | Battery | Q6BAT | Replacement battery for Q2MEM-1MBS | | Memory card | Q2MEM-1MSB | SRAM: 1M bytes | | SRAM card battery | Q2MEM-1BAT | Replacement battery for Q2MEM-1MBS | | Extension cable | QC06B | 0.6m | | | QC12B | 1.2m | | | QC30B | 3m | | | QC50B | 5m | | | QC100B | 10m |
|